Practical guides are being prepared.
Start with the setup topics below, then return here for the published video walkthroughs.
ALARMFORGEX LEARNING CENTRE
AlarmForgeX setup tutorials.
AlarmForgeX setup tutorials.
See the connection.
Short, practical video guides for bringing supported security equipment into AlarmForgeX, checking the states that matter and proving the reporting path is ready.
THE INSTALLER PATH
01Connect the system
02Import and check state
03Qualify the event
04Report with proof
Use the category filters when you are ready to follow one integration from connection to operational handover.
VIDEO LIBRARY
Choose a setup path.
Published guides appear here as they are prepared. Each video is selected and managed from the protected AlarmForgeX administrator workspace.
WHAT THE GUIDES COVER
From first connection to handover.
These guides are organised around the jobs an installer needs to complete. Exact screens and available states can vary by product model, firmware and AlarmForgeX build.
XP
Milestone XProtect
Connect through the XProtect API Gateway, import recording servers and cameras, and review available recorder, camera, retention and storage state.
View XProtect guides →HK
Hikvision
Connect a supported NVR or camera, import devices, and inspect the read-only health, HDD, storage and supported event information available to the integration.
View Hikvision guides →DH
Dahua
Connect a supported Dahua camera or recorder, review device health and configure the detection-event path where the selected model supplies it.
View Dahua guides →IP
T4000 / CSV-IP
Configure the receiver address, account and reporting path, then follow a test event through queueing, sending and acknowledgement.
View CSV/IP guides →